Access the Datacenter Router

Access SRX using AWS Cloud9 Environment

In order to access and work on the Datacenter router, we will use AWS Cloud9. Cloud 9 is an IDE platform that is managed as a service for us. We will be using just a fraction of its capability. But this intro should give you some ideas how you can provide a shared environment for managing your Infrastructure as code development.

  1. In the AWS Management Console change to the region you are working in. This is in the upper right hand drop down menu.

  2. In the AWS Management Console choose Services then select Cloud9.

1.From Your Environments page click the Open IDE button on the Workshop Environment Box. Cloud 9 Environments

  1. This will bring up the Cloud9 Console and download the github repo to your working folder.

  2. From the file menu select Upload Local Files… and click Select files button, navigate to the key file you created earlier. note: it should have a .pem extension. Upload file to Cloud9

  3. In the main panel click the x sign next to the welcome tab to close this tab.

  4. In the main panel click the + sign and launch a New Terminal. This is a bash shell on the Cloud9 Instance.

  5. move the key to the .ssh folder: mv _key_name_.pem ~/.ssh/

  6. restrict access to the key file: chmod 400 ~/.ssh/_key_name_.pem

1.From another browser tab, again navigate to the Management Console and choose Services then select CloudFormation.

  1. From the left-hand menu, select Exports in the left hand menu and find the export for ssh to the SRX: DC1-stack-name-SRX, ssh and copy the Export value ssh key and ssh to SRX

  2. Back on the Cloud9 Browser tab paste this into the bash shell. note: in the command you will notice the -i reference to the pem file you just copied, this is the private half of the key pair. The public key is on the Juniper SRX. Answer yes to Are you sure you want to continue connecting (yes/no)?

  3. You now are connected to the Juniper SRX in the Datacenter VPC. We will be configuring the Juniper SRX.

  4. Lets look at the Interfaces by typing a the #prompt: show interface brief or sh int br for short. You will see the GE0/0/1 which is the interface our ipsec tunnel were traverse.

  5. Take a look at the route table on the SRX by typing at the >prompt: sh route. You will see S* which is a static default route pointing to the address. This is the local VPC router which connects the Management Interface to the VPC. For our VPN traffic, we will need to configure the ge0/0/0 interface as the internal interface and the ge 0/0/1 as the external interface.